FOXWELL NT650 Elite Special Function Maintenance Scanner-

NT650 Elite is a Multi-Application Service Tool is a cost-effective total solution for the most frequently performed services and maintenance of your workshop. It solves 90% of the services you tackle with everyday. work for engine check, airbag, ABS diagnostic solutions and more 26 System special reset functions more accurate diagnosis, more reliable performance and better user experience. help you save money and time.

1. Oil Service Reset
Allows you to reset the service lamps on the instrument cluster. The Service Indicator System is designed to alert the driver when the vehicle is due for a service.

2. EPB, Electronic Parking Brake
allows you to perform the service and maintenance of brake systems,
including deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on multiple brands of vehicles where electronic brake systems are fitted.

3. BRT, Battery Replacement
Lets you to new battery validated, how to clear faults from the dashboard and display.

4. DPF, Diesel Particulate Filter Regeneration
let you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle is completed, the DPF light automatically goes off.

5. TBA/TPS, Throttle Body Alignment
Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA)

6. SAS, Steering Angle Sensor Calibration
let you perform calibration of the Steering Angle Sensor.

7. TPMS, Tire Pressure Monitoring System Programming
allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.

8. Gear Learning
Crankshaft position sensor adaptive learning.

9. CVT
This function is used to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced.

10. Injector Coding
This function is to reset and match the date after injector is replaced.

11. A/F Adjust
Correspondingly change the fuel supply to change the steam production of boiler and maintanin the energy balance in the combustion process.

12. ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion.

13. CLUTH adaptation
14. Seat Match
15. Language Change
16. Windowsdoor
17. Turbo
18. Headlamp
19. Change Tire Size
20. Tcmoil
21. AT Adaption
22. Replace airbag ECU model
23. EVAP Test

and more……

1. Read/Clear engine ABS and airbag trouble codes.

2. Show Live Data in test and merge graph.

Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

Press "AutoVin" to quickly detect VIN module. it shows VIN, vehicle type, release year and engine type.

NOTE: not for all models, if it can't do auto vin, please try manual select

The device only can install 2 languages , one is English , the other one you can choose from the following :
Korea, Spanish, Portuguese, French,Swedish, English, Dutch, Japanese, Italian, German,Russian. Thai, Hungarian

NOTE: These special function NOT for all car models, if you are confused, you can send your car brand, model and release year, I will check for you.
Please refer to the support list first.

you can submit your needs to me!

1 pc x Foxwell NT650 elite
1 pc x User's Guide
1 pc x Memory Card
1 pc x USB Cable
1 pc x Diagnostic Cable
1 pc x Blow Molding Case