2600W Pure Sine Inverter
(9)Ensure that the inverter is properly connected to the battery, otherwise the fuse of the inverter will be blow, wholesale 2600W Pure Sine Inverter .
2600W Pure Sine Inverter 12V / 24V / 48V / 60V Portable Car Micro Power Inverter Home Inverter Power Converter Solar Inverter is a one of our 2600W Pure Sine Inverter Tools, you can buy 2600W Pure Sine Inverter 12V / 24V / 48V / 60V Portable Car Micro Power Inverter Home Inverter Power Converter Solar Inverter from 3cseller.com.
Wholesale Top quality X-PROG Box ECU Programmer, Kess ECU Programmer, SBB Pro2 Key Programmer, Volvo 88890300 Vocom Interface, Cummins INLINE 7 Data Link Adapter
images of 2600W Pure Sine Inverter 12V / 24V / 48V / 60V Portable Car Micro Power Inverter Home Inverter Power Converter Solar Inverter
Warm reminder:For motor products, we must consult our manufacturer first, because the inverters equipped with various electrical appliances are different. If the buyer has any unclear place, please contact us at any time, and we will sincerely serve you.
Security measures
The installation and commissioning of this equipment shall be carried out by professional electrical maintenance personnel who are familiar with the structure and operation hazards of this device. Failure to observe this preventive measure may cause physical injury.
(1)Do not connect the device to a civil electrical box, such as a home line
(2)The inverter shall be kept away from water to avoid water dripping on the machine or splashing on it. Do not insert or pull out the plug with wet hands.
(3)Keep the inverter in a cool environment. The suitable temperature should be 10℃~50℃. Avoid direct sunlight and hot vents.
(4)Keep the inverter away from flammable substances or places where flammable gases accumulate.
(5)After long-term use, the inverter will generate heat, so avoid approaching heat-sensitive substances.
(6)Ensure smooth ventilation openings and good heat dissipation.
(7)High voltage danger, please do not open the machine.
(8)Use the appropriate type of wire to avoid wire fusing caused by excessive inverter current.
(9)Ensure that the inverter is properly connected to the battery, otherwise the fuse of the inverter will be blown. Turn off the switch when the machine is not in use.
(10)Before cleaning, turn off the switch and clean with a dry cloth. Do not use wet cloth or detergent.
Warm reminder:
When using the inverter, it is not allowed to plug the inverter into the household socket, so as to avoid being connected in series with the output end of the inverter when the mains power calls, causing the mains power backlash, which will damage the inverter and burn the machine in series with the mains power, which cannot be repaired. The inverter damage caused by mains power recoil is not within the scope of warranty. Please use it with caution.
Welcome to the shop
The following is a high-quality, low-cost 12V to 220V, 500W full power pure sine wave inverter, with a peak power of 1000W. For household appliances, such as TVs, fluorescent tubes, light bulbs, Common household appliances such as fans, computers, and electric fans are sufficient.
Suitable for home office and outdoor
Product display
usage method
Main electrical parameters
Input voltage range: 9.5V~15.5V
Input quiescent current: 0.5A AC220V 50Hz
Overvoltage protection:16V
Low voltage protection: 9.5V
Low voltage protection: 10.5V
This product is suitable for various household appliances with 12V input battery and output power less than 500W, such as TV, computer, electric fan, light tube and other household appliances!
Warm reminder: For motor products, we must consult our manufacturer first, because the inverters equipped with various electrical appliances are different. If the buyer has any unclear place, please contact us at any time, and we will sincerely serve you.
Security measures
The installation and commissioning of the equipment shall be carried out by professional electrical maintenance personnel familiar with the structure and operation hazards of the device. Failure to observe this precaution may result in physical injury.
(1)Do not connect the device to a civil city wire box, such as a home line.
(2)The inverter shall be kept away from water to avoid water dripping on the machine or splashing on it. Do not insert or pull out the plug with wet hands.
(3)Keep the inverter in a cool environment. The suitable temperature should be between 10℃ and 50℃. Avoid direct sunlight and hot vents.
(4)Keep the inverter away from flammable substances or places where flammable gases are accumulated.
(5)After long-term use, the inverter will generate heat, so avoid approaching heat-sensitive substances.
(6)Ensure smooth vents and good heat dissipation.
(7)Danger of high pressure, please do not turn on this machine.
(8)Use the appropriate type of wire to avoid the excessive current of the inverter causing the wire to fuse.
(9)Make sure that the inverter is connected to the battery correctly, otherwise the fuse of the inverter will be blown. Turn off the switch when the machine is not in use.
(10)Turn off the switch before cleaning, and clean it with a dry cloth. Do not use wet cloth or cleaning agent.
Basic knowledge of inverter use
1. Q: What is an inverter and what role does it play?
Answer: Simply put, an inverter is an electronic device that converts low-voltage (DC 12V/24V/36V/60V) DC into 220V AC. Because we usually rectify 220V AC power into DC power to use, and the inverter has the opposite effect, hence the name. We are in a "mobile" era, mobile office, mobile communication, mobile leisure and entertainment. In the mobile state, people not only need low-voltage DC power supplied by batteries or batteries, but also need 220V AC power that is indispensable in our daily environment. Inverters can meet our needs.
2. Q: According to the output waveform, how many types of inverters are there?
A: There are two main types, one is pure sine wave inverter, and the other is modified sine wave inverter. The modified sine wave is also called quasi sine wave (or modified sine wave, simulated sine wave, etc.).
The output waveform of pure sine wave inverter is pure sine wave. This waveform is stable, undistorted, not easy to deform, and has strong load capacity, which is close to the power supply capacity of municipal power supply. With inductive load, such as microwave oven and motor, it can make the load work faster and effectively reduce the noise generated by the equipment. Provide continuous and stable AC to ensure the continuous and normal operation of the equipment. The corrected sine wave output waveform is the corrected sine wave. The switching inverter uses PWM pulse width modulation to generate the corrected wave output. In the inverter process, due to the use of special intelligent circuit and high-power FET, the power loss of the system is greatly reduced, the soft start function is added, and the reliability of the inverter is effectively guaranteed. The modified chord wave used in the inverter can basically meet most of our power needs, with high efficiency, low noise and moderate price, so it has become the mainstream product in the market.
3. Q: What is "inductive load"?
A: In layman's terms, it means high-power electrical products made by using electromagnetic induction principle, such as motors, compressors, relays, fluorescent lamps and so on. This kind of products need a starting current which is much larger (about 3-7 times) than that needed to maintain normal operation. For example, a refrigerator that consumes about 150 watts during normal operation can have a starting power of more than 1000 watts. In addition, the inductive load will generate back electromotive voltage when the power supply is turned on or off, and the peak value of this voltage is far greater than the voltage that the inverter can bear, which will easily cause instantaneous overload of the inverter and affect the service life of the inverter. Therefore, this kind of electrical appliances have higher requirements on power supply waveform.
4. Q: What is inverter efficiency?
Answer: When the inverter is working, it also consumes a part of power, so its input power is greater than its output power. The efficiency of inverter is the ratio of input power to output power. If an inverter inputs 100 watts of DC and outputs 90 watts of AC, its efficiency is 90%.
5. Q: what is continuous output power? What is peak output power?
Answer: Some electrical appliances or tools that use motors, such as refrigerators, washing machines, electric drills, etc., need a lot of current to drive them at the moment of starting, and once they are started successfully, only a small current is needed to maintain their normal operation. Therefore, for inverters, there are concepts of continuous output power and peak output power. Continuous output power is rated output power; Generally, the peak output power is twice the rated output power. It must be emphasized that the starting current of some electrical appliances, such as air conditioners and refrigerators, is equivalent to 3-7 times of the normal working current. Therefore, only the inverter that can meet the starting peak power of electrical appliances can work normally.
6. Q: How should I connect the inverter to the power supply and load?
Answer: For appliances below 300 watts, the 300 watt inverter plug can be directly plugged into the cigarette lighter socket for use. Inverters over 300 watts are directly connected to the battery through alligator clip wires, the red line is connected to the battery positive pole, and the black line is connected to the battery negative pole. If the power consumption place is far away from the battery, the connecting principle of the inverter is: the connecting line between the inverter and the battery should be as short as possible, but the output line of 220 V AC is longer.
7. Q: what are the risks of using inverter?
A: the wire from the car battery to the input end of the inverter carries a very large current. If the copper wire is heated or even caught fire due to poor quality, too thin wire or excessive load, it will lead to a very serious accident. Therefore, the operation of the inverter must be carried out in strict accordance with the provisions of the user's manual.
8. Q: How do I know the capacity of the battery?
A: there are many letters and numbers printed on the battery. As long as you find the word xxah, you can know how large a battery it is. Let's start with the meaning of ah. A stands for ampere, that is, the unit of current, and H stands for hour. The two letters together mean "ampere hour", that is, how many amperes of current can be continuously output in an hour. The first XX is usually two numbers, that is, the number of amperes. For example, 45ah means that the battery can output (12 volts) 45 amps in an hour. As for the output power of this battery, we multiply 12 volts by 45 amps to get 540 watts, which is the output power (theoretical value) of the battery.
9. Q: How to equip batteries with suitable inverters?
A: If the specification of the battery is 12 volts and 50 ampere-hours, we multiply 12 volts by 50 ampere-hours, and the output power of the battery is 600 watts. If the efficiency of the inverter is 90%, we multiply 90% by 600 watts to get 540 watts. That is to say, your battery can drive an inverter with a maximum output power of 540 watts. Of course, you can also adopt the "one-step" purchasing method, that is, buy an inverter with an output power of 800 watts regardless of the specifications of the batteries currently used in your car. Then, use it within the allowable range of this battery at present, and then use it at full power after changing to a bigger car in the future. Finally, the power requirement of the inverter is not high, for example, 100 watts is enough, so you can buy a low-power inverter. In addition, when determining the power of the inverter, there is an important principle, that is, when using the inverter, do not run at full load for a long time, otherwise the life of the inverter will be greatly shortened, and the failure rate of the inverter will also increase significantly. We strongly recommend that users should use the inverter under the condition of not exceeding 85% of rated power.
10.Q:What should I pay attention to when using a car inverter?
Answer: First of all, use the inverter in strict accordance with the user manual; second, the output voltage of the inverter is 220 volts alternating current, and this 220 volts is in a small space and is in a movable state, so it must be extra Be careful. It should be placed in a safer place (especially away from children!) to prevent electric shock. When not in use, it is best to cut off its input power. Third, do not place the inverter in direct sunlight or near the outlet of the heater. The working environment temperature of the inverter should not exceed 40 degrees Celsius. Fourth, the inverter generates heat when it is working, so do not place objects near or on it. Fifth, the inverter is afraid of water, so do not expose it to rain or sprinkle with water.
11. Q: why is the voltage displayed lower than 220 V when using an ordinary multimeter to measure the AC output of a quasi sine wave inverter?
A: This is normal, because the multimeter with the' true effective value' file should be used when measuring the quasi sine wave AC voltage to get the correct reading.
Use of inverter
1) Power selection
It must be powered by battery or automobile cigarette lighter. 12V, 24V, 48V and 60V can be selected according to different finished products.
2)Connect to the inverter to the power supply
Turn off the "off" status of the inverter and all devices.
A:Battery power supply: Connect the negative terminal of the battery to the black terminal (-) of the inverter, and connect the positive terminal of the battery to the red terminal (+) of the inverter.
B: Power supply for automobile cigarette lighter: After the special connection of cigarette lighter is connected to the red terminal of inverter according to the red line and the black terminal of inverter according to the black line, plug the cigarette lighter into the automobile cigarette lighter.
3) Connected to inverter and consumer
Ensure that the load power source is the nominal power source of the inverter, and the starting current cannot exceed the peak capacity of the inverter. After connecting the inverter and electrical appliances, turn on the inverter and electrical appliances.
4)Turn on the inverter switch, the buzzer starts, and the cooling fan starts. If the performance is normal, the fan speed will be stopped by half, and the green indicator light will light up, indicating normal operation. The display of digital tube changes from "-"to the display of actual input and output voltage data. The upper three bits display the input voltage with an accuracy of 0.1V, and the lower three bits display the output voltage with an accuracy of 1V.
5) If the load power is higher than the rated output power of the inverter, overload protection is performed. The output voltage of the product is automatically turned off, and the indicator light turns red, and the output voltage of the digital tube is displayed as "000". Please remove the load. After connecting a load less than the rated power, the machine will start automatically every two seconds, or restart the machine through the inverter switch.
6)If there is no output and an alarm is given, judge the cause of the fault according to the singing sound. If the sound is rapid (about three times a second), the input voltage is higher than the input safe voltage, and this voltage is displayed on the digital tube; If the sound is gentle (about once a second), the input voltage is lower than the normal working voltage, and this voltage is displayed on the digital tube; When the singing is slow (about once every 2 seconds), it is caused by the high internal temperature. At this time, the cooling fan will rotate at full speed, and the machine will start automatically when the temperature drops to the safe working temperature.
Tip:Batteries are designed to provide instantaneous high current at start-up, and they are not suitable for deep discharge. If non UPS products are used until the undervoltage is turned off, the input power supply shall be disconnected and the battery shall be charged to avoid affecting the service life of the battery.
Note:Although this product is provided with overvoltage protection function, if the input voltage exceeds the working voltage of the product, it may still damage this product.
Common problems and solutions
Question 1: Power on alarm
Refer to points 4 and 6 of "use of inverter".
Problem 2: the product has no voltage output and the indicator light is not on
Possible causes 1. Battery defect.
Solution: check the battery and replace the battery if necessary.
Possible cause 2. Poor contact of wire at terminal.
Solution: Unscrew the connecting bolt and reconnect the wire with the metal part, with the smooth surface of the gasket facing inward.
Possible causes: 3. The input polarity is close, which leads to burnout. ①
Solution: remove the bottom cover and replace the supporting insurance. ①
Possible causes: 4. The switch line terminal falls off.
Solution: remove the bottom cover and reconnect the switch wire.
Note ①: it is forbidden to disassemble the bottom cover without permission or professional personnel.
Problem 3: high calorific value and protection after working for a while.
Possible cause 1. The cooling fan does not turn.
Solution: Check whether there are hard objects stuck in the wind leaf.Solution:
Possible causes 2. The fan plug falls off.
Solution: Reconnect the fan plug terminal and FAN terminal pair.Solution: Reconnect the fan plug terminal and FAN terminal pair.Solution: Reconnect the fan plug terminal and FAN terminal pair.
Possible causes 3. The inverter is placed in an unventilated place.
Solution: dredge the air duct.
Possible causes 3. The load power is at the critical point of protection.Possible causes 3. The load power is at the critical point of protection.
Solution: Reduce load power or switch to higher power inverter.
Problem 4: the power on cannot operate normally.
Possible causes 1. The load power exceeds the continuous output power of the product, and the overload protection acts.
Solution: reduce the load. If it is inductive load, leave enough starting power margin.
Possible cause 2. Input surge time is too long or battery aging.
Solution: use low-power load or replace the battery.
It may be caused by 3. The input voltage is not standard, which leads to protection.
Solution: check whether the product specification is consistent with the battery.
Warm reminder:Please read the following notes and statements patiently. In order to avoid transaction disputes as much as possible, when you buy our products, you will accept the following agreement by default
Price fluctuation:It is normal for the price of electronic products to fluctuate up and down, and the unit price of any product shall be subject to the price you paid on the same day.
Payment evaluation: Please receive the goods, after checking, pay in time and give an evaluation. If you have any dissatisfaction, please communicate with our customer service in time and we will serve you. In good faith to solve your problem!
Product warranty:
1.Warranty regulations:
A, normal use of quality problems, according to the manufacturer promised warranty period for replacement, warranty;
& nbsp; B. If the appearance of the product is damaged during the warranty period, only warranty service is provided;
& nbsp; C. The attached accessories are not covered by warranty and replacement.
2.In the following cases, the warranty will automatically become invalid:
A. the product has been damaged by wrong operation, careless use or force majeure (such as flood, fire, earthquake, lightning strike, war, etc.);
B. The product has been repaired or modified by technicians of non manufacturer or non manufacturer authorized organization;
C. The appearance is seriously damaged and cracked.
3. Repair agreement:
A, within 7 days from the receipt of goods, if the product fails due to its own reasons, please contact our after-sales customer service consultation. The inspection sent back to our company is true, and we promise to return and replace it, and we will bear the freight for you. Within one month from the date of receipt, the products need to be sold, and both parties shall bear half of the freight. One month later, the buyer will bear the round-trip freight.
B, returned products, packaging and accessories must be intact, complete, does not affect the second sale;
C. For all repaired products, you will pay the freight for returning to the factory (store). After receiving the goods, our customer service will follow up with you. Any delivered parts will be rejected and returned.
D, the product promises to return the goods unconditionally within 7 days from the date of receipt, and guarantee within one year.
4. Repair requirements:
Please note your shopping ID, address, name, telephone number and product failure in the repair courier, so that the customer service can send it back or contact you in time.
Packaging diagram
